(2,54 mm) .100" hcmd, hcms, hcsd, hcss series hcmd?10?s?03.00?01?g www.samtec.com mates with: tsw, mtsw, tst, ew, bst, lcw, zst, mtlw, tsm, ejh note: idc assemblies are non-standard, non-returnable. row option type strip (3,30) .130 (0,51) .020 (2,54) .100 (0,64) .025 sq typ (5,08) .200 (2,54) .100 a double (hcmd) single (hcms) no. of positions x .100 (2,54) + .180 (4,57) (7,87) .310 ref (3,30) .130 (2,54) .100 (5,08) .200 (2,54) .100 double (hcsd) single (hcss) (0,76) .030 sq. typ. no. of positions x .100 (2,54) + .180 (4,57) (9,53) .375 ref s = single d = double (color coded cable n/a for 31 thru 36 pins/row. see ?g option.) hcm = male strip idc socket & terminal cable f-213 male plug on one end with socket on other. begin part number with hcm. socket or male plug on each end socket or male plug on one end end assembly no. pins per row ?05, ?08, ?10, ?12, ?13, ?15, ?17, ?20, ?25, ?36 ?s = single end assembled length assembled length in inches (?/8") 2 inches minimum ??xx.xx? = assembled length ?d = double end ?t = transfer end lead style a ?01 (3,05) .120 ?02 (5,84) .230 for complete speci cations and recommended pcb layouts see www.samtec.com?hcsd or www.samtec.com?hcss hcsd, hcss insulator material: black liquid crystal polymer flammability rating: ul 94v-o insulation resistance: 5000 m temperature range: -20? to +105? (rainbow cable) -40? to +105? (gray cable) withstanding voltage: 1000 vrms @ 60 hz contact: phosphor bronze plating: 10? (0,25 ?) au on contact area, 150? (3,81 ?) sn on balance over 50? (1,27 ?) ni. current rating: 1a per contact contact resistance: 10 m lead size range: .024" (0,61 mm) sq to .026" (0,66 mm) sq lead insertion depth: .185" (4,70 mm) to .250" (6,35 mm) insertion force: 6 oz (1,67 n) average with .025" (0,64 mm) sq probe withdrawal force: 3 oz (0,83 n) average with .025" (0,64 mm) sq probe wire: 28 awg 7/36 stranded tinned copper rohs compliant: ye s for complete speci cations and recommended pcb layouts see www.samtec.com?hcmd or www.samtec.com?hcms hcmd, hcms insulator material: black liquid crystal polymer flammability rating: ul 94v-o insulation resistance: 5000 m temperature range: -55? to +80? withstanding voltage: 1000 vrms @ 60 hz terminal: phosphor bronze plating: sn over 50? (1,27 ?) ni current rating: 1a per contact wire: 28 awg 7/36 stranded tinned copper rohs compliant: ye s specifications specifications hcs = socket strip
hcsd?10?s?03.00?01?t?g hcss?15?s?03.00?01?g www.samtec.com 6 same as ? ?x except outer strip connected to conductor #2 and inside strip connected to conductor #1. breakout starts with number 1 lead indicated by brown wire or red stripe. shown on top side. 4 #1 wire opposite position #1 5 ?x (127,00) 5.00 max. (50,80) 2.00 min. (50,80) 2.00 min. (101,60) 4.00 minimum 6 when mating double row connector with two single row connectors, the outer most single will be connected to conductor #1 and the inside single to conductor #2. outer most (end of assembly) ?x ? 1 / 8 " (3,18) single row connectors (50,80) 2.00 min. (101,60) 4.00 minimum double row strips outer most (end of assembly) ?x ? 1 / 8 " (3,18) 6 other options notch polarization 2 standard cable is color coded. specify ? for gray cable with one red edge. 1 specify ?x as position. for double the same position will be polarized on both ends. (not available on hcm, unless transfer, then only the socket is polarized) 01 03 02 04 01 03 single double 02 04 specify suf x from table. all dimensions are ? 1 / 16 " (1,59 mm). not available in 28 positions and higher. 3 specify ?x as number of conductors to be broken out. requires ?xx, ?xx or ?xx 7 requires ?xx, ?xx or ?xx 7 7 required for hcss and hcsd. (not available on hcms or hcmd, unless transfer, then only the socket is polarized.) plating option 02 (3,81) .150 (1,27) .050 01 ?n = notch polarization ?r = reversed ?w ?xx? = wiring reversed daisy chain, single ?rw = reversed wiring ?s ?xx? = daisy chain single ? d ?xx? = daisy chain, double ? p ?xx? = position polarization ?s = 10" (0,25 m) gold on contact area or tail, tin on balance (standard on hcss & hcsd. leave blank) ?t = tin (standard on hcms & hcmd. leave blank) ?g = gray cable ? st ?x? = stripped & tinned ? b ?xx? = breakout ?m = middle reversed ?o = outside reversed 1 / 8 " (3,18) 1 / 4 " (6,35) 1 / 2 " (12,70) 3 / 8 " (9,53) ?st8 ?st4 ?st2 ?st3 lead style ?01 = hcss/hcsd or (3,05 mm) .120" tail for hcms/hcmd ?02 = (5,84 mm) .230" tail hcms/hcmd only
|